How to Solve the Malfunction of Slewing Bearing?

Ⅰ. Introduction to slewing bearing

The slewing bearing is a large-scale bearing that can withstand comprehensive loads. In addition, it can withstand relatively large axial and radial loads. The slewing ring is also called a rotation support point.

The application of slewing bearing in industrial production is very common as it is the relative rotation movement between two objects. With the continuous development trend of slewing bearing, it is used in many fields. If the slewing ring fails, how to solve it? Below we will give you a detailed introduction.

Ⅱ. The failure of the slewing bearing and the solution

1. There are many reasons why the slewing ring bearing has such problems. If you do not pay attention to the lubrication, and there are external dirt, if you do not immediately remove it, it will cause certain harm to the shaft and the casing of the slewing ring for a long time. Therefore, pay attention to the whole process of application.

2. If the application of the slewing bearing cannot find the cause of damage, you must be careful in the whole process of application. The grease must be selected according to the model and specifications from the slew drive factory, so that the surface rolling bearing can be reasonably prevented from being damaged. The slewing ring is very prone to jamming on the roller bearing ribs, and there is not enough lubricating fluid, which is very prone to problems.

3. If there is a problem in the slewing ring, the cause of the failure must be found first, and the appropriate method should be used immediately, so that the application of the slewing bearing can be repaired in a short period of time.