Maanshan Fuyong Intelligent Technology Co., Ltd.
How Does the Slewing Ring Bearing Adapt to the Temperature and Working Environment?

How Does the Slewing Ring Bearing Adapt to the Temperature and Working Environment?

Slewing ring bearing is called the "joint of the machine" in the machinery industry, supporting the relative reversal movement between two objects. It is an important transmission element required for the machinery subjected to axial force, radial force, and tilting moment.


1. Heat treatment of slewing ring bearing track and gear:

The raceway of the slewing ring bearing is treated by induction quenching on the surface, and the quenching hardness is kept at HRC55-62, ensuring a sufficient hardness depth for quenching.


For the purpose of transmitting power, one ferrule of the slewing ring bearing will be equipped with gear teeth. Heat treatment of the gear is generally normalized or quenched and tempered. The gear surface can also be quenched according to user requirements. The quenching hardness is HRC50-60, and a sufficient depth should be ensured. Due to different applications, gear quenching can be divided into full tooth quenching and single tooth induction quenching. Single tooth induction hardening can be divided into tooth surface tooth root quenching and tooth surface quenching.


2. Custom temperature and operating environment for slewing ring bearing:

The slewing ring bearing can work normally from -300C to +700C. If users tend to use the slewing ring bearing at a lower or higher temperature, our company can provide custom design. If the slewing ring bearing is used in a particularly harsh environment, such as marine climate, dust or abrasive particles, sand dust, cement and coal powder, it will be necessary to select special sealing rings, protective equipment, and suitable oil passages. Therefore, in order to ensure the normal effect of your slewing ring bearing, daily maintenance is required.

  • Definition of Slewing Drive

    Definition of Slewing Drive

    December 17, 2020Electric slew drive is a full-circle slewing reduction transmission mechanism integrated with a driving power source. The slewing ring is used as the driving follower and mechanism attachment part. By...view
  • Brief Introduction of Slewing Ring Bearing

    Brief Introduction of Slewing Ring Bearing

    December 17, 2020There are two common noises of slewing ring bearing: dust noise and scars noise. The solutions are as follows:The slewing bearing is a new type of mechanical parts, which consists of inner and outer r...view
  • Causes of Heating during the Use of Slewing Bearing

    Causes of Heating during the Use of Slewing Bearing

    December 30, 20201. Analysis on the causes of heating of slewing bearings:Possible reason 1:The shaft size of the slewing bearing is too large that the bearings will be tight.Solution:Provide an appropriate tolerance ...view
  • Some Details about Slew Drive Device

    Some Details about Slew Drive Device

    December 17, 20201. Product IntroductionThe electric slewing drive is an upgraded product of the slewing bearing, which is usually composed of a worm, a turbine slewing bearing, a casing, and a power source. This prod...view